Ball Joints
Previous
Next
Ball Joints
DIN 71802
DIN 71802 joints consist of a DIN 71805 ball socket and a DIN 71803 ball body. The rotation angle for the type with safety latch (types CS, BS, CSN) is 15°, without safety latch (types C, B, CN) 18° Installation for the ball pushed into the tension washer that acts as a retainer. When the holding force between the ball and the socket (see the pulling force in the table above) is not sufficient, it can be increased by adding a safety latch that can be easily fitted. The hex nut is part of the angled ball joints.
Technical Details
Kod Code | d | dl | d2 ±0,2 | d3 | 12 | 13 | a ±0,3 | P min. | sw | Mass (kg) per piece |
MAF8-2255A | 8 | M5 | 8,3 | M5 | 10 | 9 | 22 | 10,5 | 8 | 0,015 |
MAF8-2256A | 8 | M5 | 8,3 | M6 | 10,2 | 9 | 22 | 10,5 | 8 | 16,8 |
MAF8-2266A | 8 | M6 | 8,3 | M6 | 10,2 | 9 | 22 | 10,5 | 8 | 16,3 |
MAF10-1866A | 10 | M6 | 10,3 | M6 | 12 | 11 | 18 | 9 | 10 | 0,015 |
MAF10-1868A | 10 | M6 | 10,3 | M8 | 12 | 11 | 18 | 9 | 13 | 0,029 |
MAF10-1888A | 10 | M8 | 10,3 | M8 | 12 | 11 | 18 | 8,5 | 13 | 27,65 |
MAF10-1966A | 10 | M6 | 10,3 | M6 | 12 | 11 | 19 | 10 | 10 | 0,022 |
MAF10-1968A | 10 | M6 | 10,3 | M8 | 12 | 11 | 19 | 10 | 13 | 0,029 |
MAF10-1988A | 10 | M8 | 10,3 | M8 | 12 | 11 | 19 | 9,5 | 13 | 28,2 |
MAF10-2166A | 10 | M6 | 10,3 | M6 | 12 | 11 | 21 | 11 | 10 | 0,03 |
MAF10-2168A | 10 | M6 | 10,3 | M8 | 12 | 11 | 21 | 11 | 13 | 0,03 |
MAF10-2566A | 10 | M6 | 10,3 | M6 | 12 | 11 | 25 | 11,5 | 10 | 0,025 |
MAF10-2588A | 10 | M8 | 10,3 | M8 | 12 | 11 | 25 | 11 | 13 | 31,5 |
MAF10-2568A | 10 | M6 | 10,3 | M8 | 12 | 11 | 25 | 11,5 | 13 | 0,032 |
MAF13-2588A | 13 | M8 | 13,3 | M8 | 16 | 13 | 25 | 12 | 13 | 0,032 |
MAF13-3088A | 13 | M8 | 13,3 | M8 | 16 | 13 | 30 | 14 | 13 | 0,054 |
MAF16A | 16 | MIO | 16,3 | M10 | 19 | 16 | 35 | 15,5 | 17 | 0,087 |